Profile

• Mica Insulated
  
• Band heaters include barrel and nozzle type - barrel and nozzle band heaters are designed to apply heat by conduction to cylindrical surfaces.
• Sheath materials available include stainless steel with mica insulation, stainless steel with mineral insulation and aluminized or zinc steel with mica insulation.
  

• Excellent source of infrared rays
• Fits both flasks and test tubes
• Resists acids and thermal shock
• High-quality immersion heater measures 280 x 9.5mm diameter
• Heated length: 15cm
• Operates up to 928°C
• Power: 115V AC, 400w, 3.5A

• Ohkura Hybrid Recorder
• Powerful and Cost Effective
• Short case depth size of 150mm 
• IP65: Dust-proof, Water-proof 
• Wide LED with 18mm heights display 
• Direct pH and ORP sensors 
• Allows user-selected consumables 
• Weights only 1.5kg 
• Optional portable housing case available 

• Heavy duty, long lasting construction
• Standard thermal protection
• Fully grounded for safety
• Vapor-tight polypropylene terminal enclosure
• Standard 3 ft. flexible PVC liquid-tight conduits and leads. 

Band heaters are efficient and economical solutions to the heating requirements of many applications. With different electrical and termination styles, clamping mechanisms, and ability to accommodate holes and cutouts, Band heaters are successfully used

• 1/16 DIN Multi-Programmable LED Timers
• Three Different Models: Standard, High Performance and Repeat Cycle 
• Four-Digit Dual Line Display Indicates Set Value and Time Value 
• All Models Offer Multiple Field Programmable Modes for Operation and Time Ranges 

• Heavy duty, long lasting construction. 
• U.L. listed except plain steel, all CSA certified and CE compliant. 
• Grounded for safety. Vapor tight polypropylene terminal enclosure. 
• Standard 3 foot (1 meter) flexible PVC liquid tight conduit standard.

• Magnetic Mount Thermocouple Probes
• Magnetic Mounts Provide Quick Placement for Contact
• Temperature Measurements on Pipes, Ducts, etc.
• Model 88401 (left photo) Measures to 250°C (480°F)
• Model 88402 (right photo) Measures to 400°C (750°F)
• Relatively Small Size Allows Use in Tight Spaces

• High reliability & long life
• Safety, no switching sparks & contact points
• Low input power consumption
• No noise & mechanical Damage
• Needs no need mechanical motion, electronic devices
• Fast reaction, fits in high frequency motions

• Control Moisture Build-Up on Electric Motor Windings
• 120 or 240 Volts
• 25 to 250 Watts
• 5 Watts/Inch²
• Available in sizes from 1 x 5" to 2 x 25"
• Minimum Ambient Temperature -70 deg F

Float Sensor is an electrical ON/OFF Switch, which operates automatically when liquid level goes up or down with respect to specified level. The Signal thus available from the Float Sensor can be utilized for control of a Motor Pump or an allied electrical element like Solenoid, Lamps, and Relays etc.

• Fast, stable & accurate
• Watertight enclosure
• Compact size, easy mounting
• Excellent long-term stablility
• Wide input voltage range (12-40Vdc)
• Available with either current or voltage output 
• One-site, zero & span calibration